How much could you claim?

Find out in 30 seconds...
Injured in the last 3 years?
Was the accident your fault?
Did you recieve medical attention?
Please tell us where you were injured
  • Please enter your full name
  • Please enter a valid name
  • Please enter your telephone number
  • Please enter a valid telephone number
  • Please read our Terms & Conditions

    "If you've been injured through no fault of your own you could be entitled to compensation. If you're unsure if you could claim, I recommend you call Accident Advice Helpline."

    Esther Rantzen

    Health and Safety News

    Company fined after worker falls into pulping machine

    By Jonathan Brown on December 5, 2016

    Company fined after worker falls into pulping machine

    A maintenance company has been fined £120,000 after a worker fell seven metres into a paper pulping machine.

    The worker, suffered fractures to his left foot in the incident on the 9 July 2014.

    Worker fell into 2.5m of water

    Manchester Crown Court heard the employee was carrying out maintenance work to a drive shaft which involved tightening coupling bolts with a torque wrench.

    The wrench slipped off the bolt head causing the worker to fall backwards off an unprotected edge through a rubber flap into the paper pulping machine which contained 2.5 metres of water.

    After falling 7 metres in total he managed to swim, in darkness, to a ledge at the side of the pulper and call for help.

    The incident was investigated by the Health and Safety Executive (HSE) which found serious safety failings by Valmet Limited, an embedded contractor for the paper mill where the incident occurred at Manchester Road, Carrington, Manchester.

    Risks not identified

    Before the incident, Valmet Ltd – a Finnish company which provided all the mill machinery – carried out a risk assessment of the task but did not identify the fall from height risk.

    The court also heard that Valmet Ltd, previously known as Metso Ltd, had recently been fined for their involvement in a double fatality at another premises.

    Valmet Ltd of Laneside Foundry, Manchester Road, Rossendale, Lancashire pleaded guilty to breaches of Section 3(1) of the Health and Safety at Work etc. Act 1974 and has been fined £120,000 and ordered to pay costs of £8,591.

    Speaking after the hearing HSE Inspector Adam McMahon said: “A supervisor had to carry out numerous risk assessments on the day of the incident along with covering others duties. The hazard of working at height was not identified and as such a worker was exposed to a serious risk which could have resulted in death. It was pure luck that the pulper blades were not working or that the injured person did not drown.

    “Risk assessments are the foundation for the effective control of risks. Time should be afforded to those who are required to complete them to ensure the hazards are identified and risks are controlled in order to safeguard workers.”

    Source: Health and Safety Executive

    Share On


    Date Published: December 5, 2016

    Author: Jonathan Brown

    Category: News

    Accident Advice Helpline (or AAH) is a trading style of Slater Gordon Solutions Legal Limited. Slater Gordon Solutions Legal Limited is a company registered in England and Wales with registration number 07931918, VAT 142 8192 16, registered office Dempster Building, Atlantic Way, Brunswick Business Park, Liverpool, L3 4UU and is an approved Alternative Business Structure authorised and regulated by the Solicitors Regulation Authority. Authorised and regulated by the Financial Conduct Authority.

    Disclaimer: This website contains content contributed by third parties, therefore any opinions, comments or other information expressed on this site that do not relate to the business of AAHDL or its associated companies should be understood as neither being held or endorsed by this business.

    No-Win No-Fee: *Subject to insurance costs. Fee payable if case not pursued at client's request.